Icom IC-F8101 Instruction Manual - Page 31
Emergency call
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
SELCALL/ALE OPERATION 4 DDEmergency call The Emergency call allows you to broadcast an emergency signal with your own position information. • Sending an Emergency call qqHold down [ ] for 1 second to enter the Network selection screen. wwPush [r] or [s] to select the desired Network, and then push [ ]. • The Networks that belong to the Icom Selcall or Open Selcall systems must be selected. eePush [r] or [s] to select the Call Type to "Emergency." • "Selective," "Phone," "Message," "Send Position," "Get Position," "Get Status," "Emergency," "Channel Test" and "Stun" are selectable. The Get Status call is selectable in the Icom Selcall, and the Stun call is selectable in the Open Selcall. rrPush keypad to enter the Call ID, and then push [ ]. • The previously entered Call ID is displayed. • Push [t](§) or [u](§§§) to move the cursor. • Push [8] to delete the digit to the left of the cursor. • This Call ID is not stored in the Call ID list. ttPush [r] or [s] to select the Profile, then push [ ]. uuPush [ ] to transmit the Emergency call. The call is stored in the Call Out memory. • While calling, push [PTT] to cancel the call. You can also make an Emergency call when the Address screen is displayed. In this case, you can skip several steps, see page 29 for the Simple Selcall operation details. • Receiving Emergency calls When your transceiver receives an Emergency call with your individual ID, it automatically responds by transmitting. The received Selcall is stored in the Call In memory. qqAfter an Emergency call is received, transceiver displays the station's position and its time. 4 wwPush any key to return to the normal operating screen. eePush [8] to enter the Main Menu screen. rrPush [r] or [s] to select "Call In," and then push [4]. ttPush [r] or [s] to select the desired Call, and then push [4]. yyPush [r] or [s] to select the Channel. • Only the channels that belong to the selected Network in step w, are displayed. • If desired, push [Tests](§§) to transmit the Channel Test call in this step. yyPush [r] or [s] to select the information. uuPush [8] twice to return to the normal operating screen. 25