Icom IC-F8101 Instruction Manual - Page 35
Simple Selcall operation, Depending on the Entry, following settings are required.
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
DDSimple Selcall operation The Simple Selcall mode is convenient to transmit the often used Selcalls. qqPush [ ] to enter the Simple Selcall mode. • Depending on the Entry, the contents are skipped. Holding down [ ] enters the normal Selcall mode. See pages 19 to 28 for the normal Selcall operation details. wwAfter setting is finished, push [r] or [s] to select the Channel. • Only the channels that belong to the selected Network, are displayed. • If desired, push [Tests](§§) to transmit the Channel Test call in this step. SELCALL/ALE OPERATION 4 eePush [ ] to transmit the Call. 4 • While calling, push [PTT] to cancel the call. Depending on the Entry, following settings are required. (4 : Setting is required. - : The contents is skipped.) Screen (Entry) Call system/ Call type/ Network Call ID Phone Message Self ID Channel Link*4 *5 *3 *6 Note Address Emergency Link -*1 -*3 - - - 4 The skipped contents are used from the preprogrammed setting. Call In Call Out -*1 -*3 - - - 4 The skipped contents are used from the preprogrammed setting. Phone Link -*1 The Call type is always set to 4 4 - - 4 Phone. The skipped contents are used from the preprogrammed setting. Other screen - *2 4 4 4 - 4 The skipped contents are used from the previously transmitted Calls. *1 When the setting of the Entry is effective (Call is possible), the content is skipped. *2 Priority Network is used. *3 When the preprogrammed ID or previously used ID exists in the selected entry, the Call automatically selects the ID and skips the contents. *4 Only Phone call. *5 Only Message call. *6 Only the channels that belong to the Network, are displayed. 29