Icom IC-F8101 Instruction Manual - Page 67
Scan Set mode, Voice Scan Resume, All Memory Scan Speed, All Memory Scan. It scans all memory
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Scan Set mode Type Set the scan type to "Call," "S-Meter," "Voice" or "All Memory." (Default: Call) CALL: Call Scan. It scans the channels that belong to the network group whose scan type is "Call." If your station ID is called with a Selcall or ALE call, the scan stops on that channel and the voice squelch control function is activated. S-Meter: S-Meter Scan. It scans the channels that belong to the network group whose scan type is "S-Meter." If the transceiver detects the signal whose S-meter level is higher than the Meter Squelch Level setting, the scan stops on that channel. Voice: Voice Scan. It scans the channels that belong to the network group whose scan type is "Voice." If the transceiver detects voice components, the scan stops on that channel. All: All Memory Scan. It scans all memory channels. If the transceiver detects signal whose S-meter level is higher than the Meter Squelch Level setting, the scan stops on that channel. Voice Scan Resume Set the scan resume function to ON or OFF for an S- Meter, Voice or All Memory scan, and set the pause timer to between 5 seconds and 120 seconds, in 5 second steps. (Default: 10sec) When this setting is ON and a signal is detected, a scan pauses for this set period, then resumes, or resumes 2 seconds after the signal disappears. If OFF is selected, the scan pauses until the signal disappears. All Memory Scan Speed Set the scan speed for the All Memory scan to LOW, MID or HIGH. (Default: HIGH) MENU SCREEN 5 (Default: Call) Quick Reference 1 2 3 4 5 6 7 8 (Default: 10sec) 9 10 11 12 13 (Default: HIGH) 14 15 16 17 61