Icom IC-M424 Instruction Manual - Page 22
■ Call channel programming, ■ Channel name programming
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 BASIC OPERATION ■■Call channel programming You can program the Call channel with your most often-used channel in each channel group for quick recall. qqSelect the desired channel group (INT, USA or CAN) to be programmed. (p. 10) wwHold down [16/C] for 1 second to select the Call channel of the selected channel group. • "CALL" and the Call channel number appear. eeHold down [16/C] again for 3 seconds (until a long beep changes to 2 short beeps) to enter the Call channel programming mode. rrRotate Dial or push [∫](CH)/[√](CH) to select a channel. ttPush [ENT] to program the displayed channel as the Call channel. • P ush [CLEAR] to cancel. ■■Channel name programming Each channel can be assigned a unique alphanumeric ID of up to 10 characters. Capital letters, 0 to 9, some symbols and a space can be input. qqPush [∫](CH) or [√](CH) to select a channel. • F irst, cancel the Dualwatch, Tri-watch or Scan function, if activated. wwPush [NAME] to open the channel name programming screen. • A black box is displayed on the first character. eeEnter the desired channel name in the following manner: • Select a desired character using Dial, or Push [ENT] to set it. • T o move the cursor, select either arrow, "←" or "→," then push [ENT]. • Select "SPACE," then push [ENT] to input a space. • Select "DELETE," then push [ENT] to delete a character. • Push [CLEAR] to cancel and return to the previous screen. 13