Icom IC-M424 Instruction Manual - Page 35
shown below appears. Edit your latitude and longitude po, sition and UTC time as follows
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
DSC OPERATION 7 ttAfter transmitting the call, the transceiver waits for an acknowledgment call. • T he Distress call is automatically transmitted every 3.5 to 4.5 minutes, until an acknowledgement is received ('Call repeat' mode), or DSC cancel call is made. (p. 27) • Push [RESEND] to manually transmit the Distress repeat call. • Push then push [INFO] to display the transmitted Distress call information. • Push then push [PAUSE] to pause the 'Call repeat' mode, push [RESUME] to resume it. yyAfter receiving an acknowledgment call, push [ALARM OFF] then reply using the microphone. ➥➥A distress alert contains: • Nature of distress : Selected in step w. • Position information : T he latest GPS or manual input position is held for 23.5 hours, or until the power is turned OFF. When no GPS receiver is connected, and both position 1 and time have been manually programmed, the screen as 2 shown below appears. Edit your latitude and longitude po- sition and UTC time as follows: 3 4 5 6 7 ➥➥Push [CHG], then edit your latitude and longitude posi- 8 tion and UTC time. • Select a desired number using Dial, or [Y]/[Z 9 • Push [ENT] or Dial to set it. • T o move the cursor, select either arrow, "←" or "→," then push 10 [ENT] or Dial. 11 • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. 12 • Select W (West longitude) or E (East longitude) when the cursor is on the 'W' or 'E' position. 13 14 15 16 26