Icom IC-M424 Instruction Manual - Page 51
as shown below is displayed., Push [CALL] to transmit the Test call.
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
DSC OPERATION 7 rrPush [CALL] to transmit the Test call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. ttAfter the Test call has been transmitted, the following screen is displayed. yyWhen the acknowledgement call is received, beeps sound and the following screen is displayed. 1 uuPush [ALARM OFF] to stop the beeps, and then the screen as shown below is displayed. 2 3 4 5 6 iiPush [EXIT] to return to the normal operating mode. 7 8 9 10 11 12 13 14 15 16 42
42
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Test call.
r
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Test call has been transmitted, the following
t
screen is displayed.
When the acknowledgement call is received, beeps sound
y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen
u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode.
i