Icom IC-M424 Instruction Manual - Page 63
Receiving, a Distress Relay Acknowledgement
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DSC OPERATION 7 DDReceiving a Distress Relay Acknowledgement When a Distress Relay Acknowledgement is received: ➥➥The emergency alarm sounds for 2 minutes. ➥➥"RCVD DIST RELAY ACK" pops up and the LCD backlight blinks. qqPush [ALARM OFF] to stop the alarm and the blinking backlight. wwPush a softkey to select your desired action. [IGN] ➥ Push to return to the normal operating mode. • The transceiver exits the DSC mode. • By pushing [PTT], the transceiver also exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. 1 [INFO] ➥ Push to display the Received call information. (p. 64) 2 3 [ACPT] ➥➥ Push to accept the call. 4 And then, push [CH 16] to switch the operating channel 5 to Channel 16, and then monitor it, as a coast station may require assistance. 6 • If you haven't pushed [CH 16] within 10 seconds, the operating channel automatically switches to Channel 16. (p. 67) 7 8 9 10 11 Push 12 13 14 15 16 54