Icom IC-M424 Instruction Manual - Page 72
■ Received Call log, Receiving a Test Acknowledgement Call, Distress message
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
7 DSC OPERATION DDReceiving a Test Acknowledgement Call When a Test Acknowledgement Call is received: ➥➥The alarm sounds for 2 minutes. ➥➥"RCVD TEST ACK" pops up. The LCD backlight blinks for 2 minutes. qqPush [ALARM OFF] to stop the alarm and the blinking backlight. • If [ALARM OFF] is not pushed within 2 minutes, the next screen may appear, depending on the received Category. wwPush a softkey to select your desired action. ■■Received Call log The transceiver automatically stores up to 50 distress messages and 50 other messages, and they can be used as a supplement to your logbook. • W hile in the normal operating mode, " " blinks in the upper right corner of the LCD when there is an unread DSC message. DDDistress message qqPush [LOG] to enter "RCVD CALL LOG" in the DSC CALLS menu, or you can enter it through the Menu screen. MENU ➪ DSC Calls ➪ Received Call Log (Push [MENU]) (Rotate Dial, then push [ENT].) wwPush [Y] or [Z] to select "Distress," then push [ENT]. • T he Distress messages are stored in "Distress." • " " appears when there are unread DSC messages. • " " appears when there are no unread DSC messages. • No icon appears when there are no DSC messages. [EXIT] ➥➥ Push to return to the normal operating mode. • The transceiver exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. 63