Icom IC-M424 Instruction Manual - Page 93
Connect To The Ma-500tr, Dc Power Connector, Ground Terminal, Command Microphone Jack
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
CONNECTIONS AND MAINTENANCE 10 r DC POWER CONNECTOR Connects to a 13.8 V DC power source. CAUTION: After connecting the DC power cable, NMEA leads, external speaker leads and PA speaker leads, cover the connector and leads with an adhesive tape, as shown below, to prevent water seeping into the connection. Rubber vulcanizing tape t GROUND TERMINAL Connects to a vessel ground to prevent electrical shocks and interference from other equipment occurring. Use a PH M3 × 6 screw (not supplied). y COMMAND MICROPHONE JACK Connects to the optional Command microphone. (p. 88) 1 DDConnect to the MA-500TR 2 Connect the transceiver to the high-density D-Sub 15-pin connector of the MA-500TR using the OPC-2014* cable. Af- 3 ter connecting, an Individual DSC call can be made to the AIS target using the transponder without entering the target's 4 MMSI code. 5 * The OPC-2014 is supplied with the MA-500TR 6 • Listener A (Data-H) lead (Yellow): 7 Connects to lead 3 of the OPC-2014. 8 • Listener B (Data-L) lead (Green): 9 Connects to lead 2 of the OPC-2014. 10 • Talker A (Data-H) lead (White): 11 Connects to lead 5 of the OPC-2014. 12 • Talker B (Data-L) lead (Brown): 13 Connects to lead 4 of the OPC-2014. 14 15 16 84