Icom IC-M424 Instruction Manual - Page 32
■ Position and time programming
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
7 DSC OPERATION ■■Position and time programming A Distress call should include the ship's position and time. If no GPS is connected, your position and UTC (Universal Time Coordinated) time should be manually input. They are automatically included when a GPS receiver compatible with the NMEA0183 ver. 2.0 or 3.01 format is connected. • Manual programming is disabled when a GPS receiver is connected. • Manually programmed position and time will be held for only 23.5 hours. qqEnter "POSITION INPUT" in the DSC SETTINGS menu. MENU ➪ DSC Settings ➪ Position Input (Push [MENU]) (Rotate Dial, then push [ENT].) wwEdit your latitude and longitude position using Dial, or [Y]/ [Z Select a desired number using Dial, or [Y]/[Z Push [ENT] or Dial to set it. • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. • Select W (West longitude) or E (East longitude) when the cursor is on the 'W' or 'E' position. eeAfter entering the position, push [ENT] to program it. rrThe UTC time programming screen is displayed, enter the UTC time in the following way: • Select a desired number using Dial, or [Y]/[Z Push [ENT] or Dial to set it. • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. ttPush [ENT] or Dial to program your position and time. • Return to the "DSC SETTINGS" screen. 23