Icom IC-M424 Instruction Manual - Page 52
Transmitting a Test Acknowledgement call, Quick ACK
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7 DSC OPERATION DDTransmitting a Test Acknowledgement call When the "TEST ACK" in DSC settings is set to 'Auto TX' (p. 66), the transceiver automatically transmits a reply call when receiving a Test call. Quick ACK: qqWhen a Test call is received, beeps sound and the screen shown below is displayed. Push [ALARM OFF] to stop the beeps. eeThe Test ACK confirmation screen is displayed. Push [CALL] to transmit the acknowledgement call. rrWhile transmitting the acknowledgement call, the screen shown below is displayed, and then returns to the normal operating mode. wwPush [ACK]. • Push [INFO] to display the Test call information. P ush [BACK] to return to the previous screen, or push [ACK]. 43
43
7
DSC OPERATION
Transmitting a Test Acknowledgement call
D
When the “TEST ACK” in DSC settings is set to ‘Auto TX’
(p. 66), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
When a Test call is received, beeps sound and the screen
q
shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [INFO] to display the Test call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Test ACK confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen
r
shown below is displayed, and then returns to the normal
operating mode.