Icom IC-M424 Instruction Manual - Page 47
Push [CALL] to transmit the Position Report Call., UTC time as follows
View all Icom IC-M424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
DSC OPERATION 7 rrPush [CALL] to transmit the Position Report Call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. ttAfter the Position Report Call has been transmitted, the transceiver automatically returns to the normal operating mode. 1 When no GPS receiver is connected, and both position and 2 time have been manually programmed, the screen shown 3 below appears. Edit your latitude and longitude position and UTC time as follows: 4 5 6 7 8 ➥➥Push [CHG], then edit your latitude and longitude position 9 and UTC time. • Select a desired number using Dial, or [Y]/[Z 10 • Push [ENT] or Dial to set it. 11 • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. 12 • S elect N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. 13 • Select W (West longitude) or E (East longitude) when the cur- 14 sor is on the 'W' or 'E' position. 15 16 38