Icom IC-R75 Instruction Manual - Page 30

7 SCANS ■ Programmed scan operation q S elect VFO mode with [V/M]. w Select the desired operating mode. • The operating mode can also be changed while scanning. e Set [RF/SQL] open or closed. • See previous page for scan condition. • If the [RF/SQL] control function is set as RF control, the squelch always opens. See pgs. 14, 30 for details. r Push [SCAN] to start the programmed scan. • "SCAN" appears while scanning. USB R X ANT 1 AGC S1 3 5 7 9 20 40 60dB VFO SCAN t W hen the scan detects a signal, the scan stops, pauses or ignores it depending on the resume setting and the squelch condition. y To cancel the scan, push [SCAN]. If the same frequencies are programmed into the scan edge memory channel P1 and P2, programmed scan does not start. ■ Memory/select memory scan operation q S elect memory mode with [V/M]. w Select the desired operating mode. • The operating mode can also be changed while scanning. e Set [RF/SQL] open or closed. • See previous page for scan condition. • If the [RF/SQL] control function is set as RF control, the squelch always opens. See pgs. 14, 30 for details. r P ush [SCAN] to start the memory/select memory scan. • "SCAN" appears while scanning. t P ush [SEL] to toggle between memory scan and select memory scan. y W hen the scan detects a signal, the scan stops, pauses or ignores it depending on the resume setting and the squelch condition. u To cancel the scan, push [SCAN]. 2 or more memory channels must be programmed for memory scan to start. USB R X ANT 1 AGC S1 3 5 7 9 20 40 60dB SCAN MEMO S ■ Setting select memory channels q S elect memory mode with [V/M]. w S elect the desired memory channel to set as select memory channel. e P ush [SEL] to set the memory channel as a select memory or not. • "S" appears for select memory channels. r R epeat steps w to e to program another memory channel as a select memory channel, if desired. USB R X ANT 1 AGC S1 3 5 7 9 20 40 60dB MEMO S "S" appears for the select channel. 26