Icom IC-R75 Instruction Manual - Page 34
Set Mode
View all Icom IC-R75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
9 SET MODE ■ Set mode description Set mode is used for programming infrequently changed values or conditions of functions. D Set mode operation q Push [(ANT) SET] to enter the set mode. w Push [UP Y] or [Z DN] to select the desired item. e Set the desired condition using the tuning dial. r Push [(ANT) SET] to exit the set mode. • RF/squelch control The [RF/SQL] control can be set as the squelch control (default; RF gain is fixed at maximum), the RF gain control only (squelch is fixed as open) or RF/squelch control. See p. 14 for details. • Confirmation beep A beep sounds each time a switch is pushed to confirm it. This function can be turned OFF for silent operation. The volume level can be set in the next item. • Beep level This item adjusts the volume level for confirmation beep tones from 0% to 100% in 1% steps. • The volume level is displayed in 10% steps. '5' indicates 50% volume level. • Beep level limit This item limits the maximum volume level for confirmation beep tones. • S-meter peak hold The peak level of the S-meter can be displayed for 0.5 sec. to confirm it easily. 30