Icom IC-R75 Instruction Manual - Page 35
The noise blanker for AM mode can be turned
View all Icom IC-R75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
• Scan resume This item sets the scan resume function ON or OFF. • "on" scan resumes 10 sec. after stopping on a signal (or 2 sec. after a signal disappears) • "oF" scan does not resume after stopping on a signal. See p. 25 for scanning details. • Scan speed The receiver has 2 speeds for scanning, high and low. See p. 25 for scanning details. • AM mode noise blanker The noise blanker for AM mode can be turned ON and OFF. • CW pitch control The received CW audio pitch and monitored CW audio can be adjusted to suit your preferences (300 to 900 Hz) without changing the operating frequency. • The CW audio pitch can be adjusted in 10 Hz steps. • The CW audio pitch is displayed in 10 Hz steps. '60' indicates 600 Hz CW audio pitch. • Blank channel indication This item sets the blank channel indication ON or OFF. • "on" blank memory channels are skipped and can not be selected. • "oF" all memory channels can be selected. SET MODE 9 31