Icom IC-R75 Instruction Manual - Page 32

8 CLOCK AND TIMERS ■ Setting the current time The receiver has a built-in 24-hour clock with poweroff and power-on timer functions. This is useful when logging SWL's, BCL's and so on. q Push [CLOCK] to select clock indication mode. • Current time and "CL" appear. e S et the current time using the tuning dial; or push keypad using 4-digit 24 hour system. w P ush [(ANT) SET] for 2 sec. to enter time setting condition. • Current time flashes. r Push [ENT] to set the time. • Push [CLR] to cancel the setting. t Push [CLOCK] to exit clock indication mode. ■ Setting power-on time The receiver can be set to turn ON automatically at a specified time. q Push [CLOCK] to select clock indication mode. w Push [UP Y] to select power-on timer screen. • Power-on time and "on" appear. r S et the desired time using the tuning dial; or push keypad using 4-digit 24 hour system. t Push [ENT] to set the time. • Power-on timer is automatically turned ON. • Push [CLR] to cancel the setting. TIMER e P ush [(ANT) SET] for 2 sec. to enter time setting condition. • Power-on time flashes. • Push [(ANT) SET] momentarily when the power-on timer is already turned ON. y P ush [(ANT) SET] momentarily to toggle the power-on timer ON and OFF, if necessary. • "o" and "X" indicates the power-on timer is turned ON and OFF, respectively. u Push [ENT] to exit clock indication mode. i P ush [POWER] for 2 sec. to turn the power OFF. • When the set time arrives, the power is automatically turned ON. 28