Icom IC-R75 Instruction Manual - Page 41
Fuse replacement, Clock backup battery replacement
View all Icom IC-R75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
MAINTENANCE 11 ■ Fuse replacement If a fuse blows or the receiver stops functioning, try to find the source of the problem, and replace the damaged fuse with a new, rated fuse. CAUTION: DISCONNECT the DC power cable from the receiver when changing a fuse. The IC-R75 has 2 types of fuses installed for receiver protection. • DC power cable fuses FGB 3 A • Circuitry fuse FGB 3 A CIRCUITRY FUSE REPLACEMENT The 13.8 V DC from the DC power cable is applied to all units in the IC-R75 through the circuitry fuse. This fuse is installed in the MAIN unit. q R emove the top cover as shown on p. 34 w R eplace the circuitr y fuse as shown in the diagram at right. e R eplace the top cover. DC POWER CABLE FUSE REPLACEMENT 3 A fuse FGB 3 A ■ Clock backup battery replacement The receiver has a lithium backup battery (CR2032) inside for clock and timer functions. The usual life of the backup battery is approximately 2 years. When the backup battery is exhausted, the receiver receives normally but cannot retain the current time. CR2032 w e r q 37