Icom ID-51A PLUS Instruction Manual - Page 22
STARTING INITIAL SETUP, ■Attaching the Battery pack
View all Icom ID-51A PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2 STARTING INITIAL SETUP Before starting D-STAR, the following steps are needed or recommended. STEP 1 Attaching the Battery pack, and charging the bat- tery. (p. 10) STEP 2 Inserting a microSD card. (p. 10) STEP 3 Turning ON the transceiver. (p. 11) STEP 4 Adjust the audio level. (p. 11) STEP 5 Receiving GPS data. (p. 12) STEP 6 Entering your Call sign (MY) into the transceiver. (p. 13) STEP 7 Register your Call sign at a Gateway repeater. (p. 15) STEP 8 Save your initial setting onto the microSD card. (p. 17) You have completed the steps!! 9 ■■Attaching the Battery pack Attach or detach the battery pack or battery case, as illustrated below. To attach To detach w q Battery pack or battery case q q w Illustration shows the battery pack is attached. Even when the transceiver power is OFF, a small current still flows in the radio. Remove the battery pack or case from the transceiver when not using it for a long time. Otherwise, the batteries in the pack or the case will become exhausted. When the temperature is around 0°C (+32°F) or below, the battery protection function automatically sets transceiver power to Low1 power (0.5 W), and disables power selections (High, Mid and Low2).