Icom ID-51A PLUS Instruction Manual - Page 33
■Menu items and their details, DUP/TONE..., Scan
View all Icom ID-51A PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
MENU SCREEN MENU SCREEN 3 ■■Menu items and their details This topic describes the Menu items and their details. DUP/TONE... Settings to access repeaters. Offset Freq Sets the frequency offset for duplex (repeater) operation. Repeater Tone Selects a tone frequency used to access the repeaters. TSQL Freq Selects a tone frequency for the Tone squelch or the pocket beep function. Tone Burst Turns the Tone Burst function ON or OFF. This function is used to suppress the squelch tail noise heard from the transceiver's speaker. DTCS Code Selects a DTCS (both encoder/decoder) code for DTCS squelch or the pocket beep function. DTCS Polarity Selects the DTCS polarity for the DTCS squelch or the pocket beep function. Digital Code Selects a digital code for the Digital Code squelch function. Scan Set scan options. Pause Timer Selects the scan pause time. When receiving signals, the scan pauses according to the scan pause timer. 3 Resume Timer Selects the scan resume time from a pause after the re- ceived signal disappears. Temporary Skip Timer Selects the Temporary Skip Time. When the time is set, specified frequencies are skipped for this period during a scan. Program Skip Turns the Program Skip Scan function ON or OFF for a VFO mode scan. Bank Link Selects banks to be scanned during a Bank Link Scan. Program Link Sets the link function for the program scan edge channels. See the Advanced Instructions for details of the preset values. 20