Icom ID-51A PLUS Instruction Manual - Page 23
■Charging the battery pack, ■Inserting the microSD card
View all Icom ID-51A PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2 STARTING INITIAL SETUP STARTING INITIAL SETUP ■■Charging the battery pack Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. • BE SURE to turn OFF the power while charging. Other- wise the attached battery pack cannot be charged. • W hile charging, the charging icon " " sequentially shows eleven level steps along with the word "Charging...". • T he icon disappears when the battery pack is completely charged. Transceiver BE SURE to attach the battery pack before connecting the DC cable. BP-271 to [DC IN] BC-167S BE SURE to turn power OFF while charging. to an AC outlet The BC-167SA, BC-167SD and BC-167SV have different shapes. • Charging time: BP-271 approximately 3.0 hours BP-272 approximately 4.5 hours ■■Inserting the microSD card qqMake sure the transceiver turns OFF. wwLift OFF the [micro SD] slot cover on the side panel. eeWith the terminals facing the front, insert the card into the slot until it locks in place, and makes a 'click' sound. 2 DO NOT touch the terminals. NEVER forcibly or inversely insert the card. It will damage the card and/or the slot. [micro SD] slot microSD card Terminals facing the front Slot cover rrCompletely close the [micro SD] slot cover. 10