Icom ID-51A PLUS Instruction Manual - Page 52
About transmit power levels, Transmit power level display
View all Icom ID-51A PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4 BASIC OPERATION DDAbout transmit power levels ❍ When the external DC power cable (13.5 V DC) is connected or BP-271/BP-272 is attached. : 5 W (High)/2.5 W (Mid)/1.0 W (Low2)/ 0.5 W (Low1)/0.1 W (S-Low) (approximately) ❍ When the BP-273 is attached. : A pproximately 0.1 W (S-LOW) (fixed) NOTE: When using the BP-273 battery case, "SLO," "LO1," "LO2," "MID" or no icon (high power) appears on the display by holding down [LOW] for 1 second. But "SLO" appears while transmitting, and the output power is limited to approximately 0.1 watts. • Transmit power level display High power (5 W) Mid power (2.5 W) Low2 power (1.0 W) Low1 power (0.5 W) S-Low power (0.1 W) 39
39
4
BASIC OPERATION
D
About transmit power levels
❍
When the external DC power cable (13.5 V DC) is con-
nected or BP-271/BP-272 is attached.
: 5 W (High)/2.5 W (Mid)/1.0 W (Low2)/
0.5 W (Low1)/0.1 W (S-Low)
(approximately)
❍
When the BP-273 is attached.
:
Approximately
0.1 W (S-LOW)
(fixed)
NOTE:
When using the BP-273 battery case,
“SLO,”
“LO1,” “LO2,” “MID” or no icon (high power) appears on
the display by holding down [LOW]
for 1 second.
But “SLO” appears while transmitting, and
the output
power is limited to approximately 0.1 watts.
High power (5 W)
Mid power (2.5 W)
Low2 power (1.0 W)
S-Low power (0.1 W)
Low1 power (0.5 W)
•
Transmit power level display