Icom ID-51A PLUS Instruction Manual - Page 54
MEMORY CHANNEL OPERATION, ■Memory channel programming
View all Icom ID-51A PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5 MEMORY CHANNEL OPERATION ■■Memory channel programming The Memory mode is useful to quickly select often-used repeaters. This section describes the basic channel programming. See the Advanced Instructions for details. Example: Programming 146.030 MHz into memory channel 11 (a blank channel). qqPush [V/MHz] to select the VFO mode. wwRotate [DIAL] to set a fre- quency to 146.030 MHz. eeHold down [S.MW] for 1 second to enter the Select Memory write mode. • 1 short and 1 long beep sound. • T he memory channel number blinks, and memory contents are displayed. Hold down for 1 sec. rrRotate [DIAL] to select the channel 11. • Select Call channels (C0 to C3) to program into a call channel, VFO to program into VFO or scan edge channels (0A/0B to 24A/24B) to program into a scan channel. ttHold down [S.MW] for 1 second to program, and then return to the VFO mode. • 3 beeps sound. • Before returning to the VFO mode, the programmed memory contents are briefly displayed. 41 Hold down for 1 sec.