Icom ID-51A PLUS Instruction Manual - Page 92
■GPS Logger function
View all Icom ID-51A PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
8 GPS OPERATION ■■GPS Logger function The GPS Logger function allows you to store the GPS position data (Latitude, Longitude, Altitude, Positioning state, Course, Speed and Date) onto a microSD card, as a route. If you use this function while driving, you can check your driving course on a mapping software. (Default setting is ON.) NOTE: The GPS logger function requires a microSD card installation. • See page 10 for more details. You can display your route as you move, if you import the log file into a mapping software. • Y ou can see your route on the software map. The files may not be compatible with all mapping software. • See the PDF type Advanced Instructions for copying the log file to your PC. NOTE: • This function is ON as the default setting, if you install a microSD card, the transceiver continuously stores the position data from the GPS receiver, even if the transceiver is rebooted. To cancel this function, turn the function OFF. While this function is ON, and when the transceiver is turned OFF, the log file will be closed. Then the transceiver is turned ON and positioning is carried out by the GPS receiver, a new log file will be created. • When the microSD card is full, this function will automatically pause. 79 Turning OFF the GPS Logger function If you do not use this function, turn OFF the function as following procedures. qqPush [MENU] to enter the Menu screen. wwPush D-pad() to select "GPS Logger," and then push D-pad(Ent). (GPS > GPS Logger > GPS Logger) D-pad (Ent) (�) • If the item is not displayed, push D-pad() one or more times to select the page. eePush D-pad() to select "OFF." rrPush [MENU] to exit the Menu screen. • The GPS Logger cancels.