Icom ID-51A PLUS Instruction Manual - Page 49
■Selecting the Mode and the DR function, VFO mode, Memory/Call channel/Weather channel* mode
View all Icom ID-51A PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
BASIC OPERATION 4 ■■Selecting the Mode and the DR function • VFO mode The VFO mode is used to set the desired frequency. • Memory mode The Memory mode is used for operation on Memory channels, which store programmed frequencies and other parameters. • Call channel mode Call channels are used for quick recall of most-often used frequencies. • Weather channel mode* Weather channels are used for monitoring weather channels from the NOAA (National Oceanographic and Atmospheric Administration) broadcasts. DDMemory/Call channel/Weather channel* mode qqIn the VFO mode, push [M/CALL] to select the Mem- ory mode. • " " and the selected Memory channel number appear. wwPush [M/CALL] again to select the Call channel mode, and then push again to select the Weather channel mode. • T he Memory mode, Call channel mode or Weather channel mode* are alternately selected. • In the Call channel mode, the selected Call channel number 4 ("C0" to "C3") appears. • In the Weather channel mode*, the selected weather channel number ("WX-01" to "WX-10") appears. eeRotate [DIAL] to select a desired channel. *Appears in only the U.S.A. version transceivers. DDVFO mode qqPush [V/MHz] . • Push [V/MHz] selects the 1 MHz or 10 MHz Quick Tuning function step, or turns it OFF. wwRotate [DIAL] to set the operating frequency. Memory mode Call channel mode BASIC OPERATION VFO mode Weather channel mode* 36