Insignia NS-32E440A13 User Manual (English) - Page 15
Using composite video good, Using coaxial good - tv power cord
View all Insignia NS-32E440A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Insignia 32" 1080p LED TV Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an A/V cable (not provided) to the AV IN Y jack and L/R AUDIO jacks on the side of your TV and to the composite video and audio out jacks on the cable or satellite box. Note • The AV IN Y video jack shares the audio jacks with the COMPONENT IN video jacks. • When you connect the audio using the L/R AUDIO jacks, the audio output is analog. Cable or satellite box Cables are often color-coded to match color-coded jacks. Note: The yellow video connector on the AV cable connects to the green AV IN Y video jack. Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the TV IN ANT/CABLE jack on the side of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box A/V cable Coaxial cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 20. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 20. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. www.insigniaproducts.com 11