Intel MFSYS25 User Guide - Page 123
Storage Layout, The Storage Layout graphics
UPC - 735858196901
View all Intel MFSYS25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Storage Layout The Storage Layout report shows a graphical or tabular representation of all the components in the storage subsystem. This report shows you: • Physical drives and drive groups (physical drives assigned to a storage pool) • Storage pools with the assigned hot-spare drives • Virtual drives showing the drive name, storage capacity, and RAID level • The drive mappings to the servers showing the drive numbers for each drive on the server • The storage control module affinity for each virtual drive. To access the Storage Layout report, click Reports > Storage Layout in the left navigation panel. You can switch between the graphical and table views by clicking on the link at the top of the report. Note: The Physical drives and Server columns represent the physical slots for hard drives and servers. If a drive is not present, it will be marked as not present. The Storage Layout graphics in Figure 65 and Figure 66 illustrate both the graphical and tabular views for the following storage configuration: • Fourteen physical drives present in the system. • Drives 1, 2, and 3 are grouped together in a single storage pool named "Storage Pool 1". • Drive 14 is a global hot spare. • Drives 4 - 13 are available/unused. • One storage pool is present. The storage pool is named "Storage Pool 1" and is 100.58 GB in size. • Two virtual drives are present. One virtual drive is named "Finance" and is configured as a 25-GB RAID 0 drive. The second virtual drive is named "Marketing" and is configured as a 30-GB RAID 0 drive. • The virtual drive "Finance" is assigned to Server 1 as Drive 0. The virtual drive "Marketing" is assigned to Server 2 as Drive 0. Intel® Modular Server System User Guide 107