Intel MFSYS25 User Guide - Page 45
Installing and Removing the Backup Battery, Installing a Backup Battery
UPC - 735858196901
View all Intel MFSYS25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Installing and Removing the Backup Battery Installing a Backup Battery To install a backup battery, follow these steps: 1. Review the safety and ESD information at the beginning of this manual and in the appendices. 2. Remove the storage control module from the system. For instructions, see "Removing a Storage Control Module" on page 27. Warning: You must replace the storage control module with a filler panel or another storage control module within two minutes. 3. Place the storage control module sideways on a work surface so that its largest surface area is touching the work surface and the retention lever is on the top. 4. With a Phillips* screwdriver, remove the screw securing the top cover to the storage control module (see letter "A" in Figure 16). B C A AF002563 Figure 16. Removing Top Cover from Storage Control Module 5. Slide the cover towards the rear of the storage control module (see letter "B" in Figure 16) and lift upward (see letter "C" in Figure 16). Intel® Modular Server System User Guide 29