Intel MFSYS25 User Guide - Page 56
Installing a 2.5-inch Hard Drive into the Storage Bay,
UPC - 735858196901
View all Intel MFSYS25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Caution: Only hard drives validated for use in the Intel® Modular Server System MFSYS25/ MFSYS35 should be installed. You may damage the Intel® Modular Server System MFSYS25/MFSYS35 if you install a hard drive that is not listed in the Intel® Modular Server System Tested Hardware and Operating System List. Installing a 2.5-inch Hard Drive into the Storage Bay To install a 2.5-inch hard drive into the storage bay, follow these steps: 1. Review the safety and ESD information at the beginning of this manual and in the appendices. 2. Press the retaining lever on an available drive carrier to release the drive carrier from the drive bay module (see letter "A" in Figure 27). Remove the drive carrier from the drive bay module (see letter "B" in Figure 27). A B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 AF002425 Figure 27. Removing a 2.5-inch Drive Carrier from a Drive Bay Module 3. With a Phillips* screwdriver, remove the four screws securing the filler panel to the drive carrier. 40 Intel® Modular Server System User Guide