Intel S5000PSL User Guide - Page 26
Configuration Jumpers, Jumper Name, What Happens at System Reset - bmc
UPC - 735858196055
View all Intel S5000PSL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Jumper Name Password Clear (J1D2) Pins 1 - 2 2 - 3 BMC Force Update (J1E3) 1 - 2 2 - 3 What Happens at System Reset Protect password: These pins should be jumpered for normal operation. Erase password: If these pins are jumpered, then the password will be cleared on the next server boot. These pins should not be jumpered for normal operation. To use this jumper to reset the password: Power down the server. Place the jumper on pins 2 - 3. Power on the server and wait 5 to 10 seconds. Power down the server. Move the jumper back to pins 1 - 2. Power on the server. Disable force update: These pins should be jumpered for normal operation. Enable force update: Jumpering these pins forces a BMC update. Figure 3. Configuration Jumpers 8 Intel® Server Board S5000PSL