Intel S5000PSL User Guide - Page 45

Clearing the CMOS - ram

Get Intel S5000PSL - Server Board Motherboard PDF manuals and user guides
UPC - 735858196055
View all Intel S5000PSL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Clearing the CMOS If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used to reset the configuration RAM. 1. Power down the system. Leave the AC power cord connected. 2. Open the chassis. See your chassis documentation for instructions on removing the chassis cover. 3. Locate the CMOS Clr jumper block at board position J1D1. See Figure 8. 4. Move the jumper from the normal operation position, covering pins 1 and 2, to the CMOS Clear position, covering pins 2 and 3, as shown by the diagram. CMOS CLR Default 2 Clear 3 CMOS J1D1 AF000424 Figure 8. CMOS Clr Jumper in the Clear CMOS Position 5. Wait 10 seconds. 6. Move the CMOS Clear jumper back to the original position, covering pins 1 and 2. 7. Close the chassis. 8. Power up the server. Intel® Server Board S5000PSL 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Intel
®
Server Board S5000PSL
27
Clearing the CMOS
If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to
be used to reset the configuration RAM.
1.
Power down the system. Leave the AC power cord connected.
2.
Open the chassis. See your chassis documentation for instructions on removing the
chassis cover.
3.
Locate the CMOS Clr jumper block at board position J1D1. See
Figure 8
.
4.
Move the jumper from the normal operation position, covering pins 1 and 2, to the
CMOS Clear position, covering pins 2 and 3, as shown by the diagram.
Figure 8. CMOS Clr Jumper in the Clear CMOS Position
5.
Wait 10 seconds.
6.
Move the CMOS Clear jumper back to the original position, covering pins 1 and 2.
7.
Close the chassis.
8.
Power up the server.
AF000424
3
2
Default
Clear
CMOS
J1D1
CMOS CLR