Invacare TER Owners Manual - Page 23
Troubleshooting, Maintenance
View all Invacare TER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
SECTION 3-SAFETY INSPECTION ❑ Ensure wheel bearings are clean and free of moisture. ❑ Ensure castors are free of debris. ❑ Check that all labels are present and legible. Replace if necessary. Troubleshooting CHAIR VEERS CHAIR SLUGGISH CASTOR SQUEAKS LOOSENESS RIGHT VEERS LEFT TURN OR FLUTTERS AND IN CHAIR PERFORMANCE RATTLES SOLUTIONS X X X X Check tyres for correct and equal pressure. X X X X Check for loose stem nuts. X X Check spokes and nipples. X X X Check that both castors contact the ground at the same time. Maintenance Maintenance Safety Precautions ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. CAUTION DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing. Suggested Maintenance Procedures 1. Before using your wheelchair, make sure all nuts and bolts are tight. Check all parts for damage or wear and replace. Check all parts for proper adjustment. 2. Keep quick/quad‐release axles free of dirt and lint to ensure positive locking and proper operation. Refer to Adjusting Quick‐Release Axles on page 32 or Adjusting Quad‐Release Handles on page 33. ƽ WARNING DO NOT use WD-40®, 3-in-1 oil®, or other penetrating lubricants on quick-release axles or camber inserts. Otherwise, binding and/or damage to the wheelchair may occur. 3. Clean quick‐release axles and camber inserts once a week with a Teflon® lubricant. Part No 1122172 23 Everyday Series Wheelchairs/Sport Series Wheelchairs