Invacare TER Owners Manual - Page 60

Caution, Warning

Get Invacare TER PDF manuals and user guides View all Invacare TER manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

SECTION 8-SUSPENSION Replacing Front Elastomers CAUTION DO NOT use excessive force when removing/installing the threaded sleeve from/onto the fork. Damage to the threaded sleeve may occur. NOTE: For this procedure, refer to FIGURE 8.2 on page 60. 1. Using two allen wrenches, turn in opposite directions and remove one mounting screw from fork. NOTE: One mounting screw will not turn. 2. Remove the threaded sleeve and mounting screw assembly from the fork. DO NOT use excessive force. 3. Remove the existing elastomer from the fork. 4. Install new elastomer determined in STEP 1 into fork. NOTE: Make sure the elastomer sits in the two recessed areas on the fork. 5. Align the mounting holes in the upper and lower portion of the fork. 6. Reinstall threaded sleeve and mounting screw assembly. DO NOT use excessive force. ƽ WARNING Use Loctite 242™when reinstalling the mounting screw into the threaded sleeve, otherwise the fork can become disassembled. Possible injury or damage could occur. 7. Apply Loctite 242 to the mounting screw. 8. Reinstall the mounting screw into the threaded sleeve and tighten securely. Upper Portion of Fork Lower Portion of Fork Mounting Screw Threaded Sleeve Mounting Screw (Use Loctite 242) Elstaomer FIGURE 8.2 Replacing Front Elastomers Everyday Series Wheelchairs/Sport Series Wheelchairs 60 Part No 1122172

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
SECTION 8—SUSPENSION
Everyday Series Wheelchairs/Sport Series Wheelchairs
60
Part No 1122172
Replacing Front Elastomers
CAUTION
DO NOT use excessive force when removing/installing the threaded sleeve from/onto the fork.
Damage to the threaded sleeve may occur.
NOTE: For this procedure, refer to FIGURE 8.2 on page 60.
1.
Using two allen wrenches, turn in opposite directions and remove one mounting screw from fork.
NOTE: One mounting screw will not turn.
2.
Remove the threaded sleeve and mounting screw assembly from the fork. DO NOT use excessive force.
3.
Remove the existing elastomer from the fork.
4.
Install new elastomer determined in STEP 1 into fork.
NOTE: Make sure the elastomer sits in the two recessed areas on the fork.
5.
Align the mounting holes in the upper and lower portion of the fork.
6.
Reinstall threaded sleeve and mounting screw assembly. DO NOT use excessive force.
±
WARNING
Use Loctite 242™when reinstalling the mounting screw into the threaded sleeve, otherwise the
fork can become disassembled. Possible injury or damage could occur.
7.
Apply Loctite 242 to the mounting screw.
8.
Reinstall the mounting screw into the threaded sleeve and tighten securely.
FIGURE 8.2
Replacing Front Elastomers
Mounting Screw
Elstaomer
Threaded Sleeve
Lower Portion of Fork
Upper Portion of Fork
Mounting Screw
(Use Loctite 242)