JVC DR-DX5S Instruction Manual - Page 31

CABLE/DBS TV DVD BASIC OPERATIONS ON DVD DECK EN 31 Simulated Surround Effect 0-9 CANCEL ENTER S I CLEAR Selection Keys FGDE RETURN T ON SCREEN Time Search You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a program (DVD-RAM, DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/ SVCD and Audio CD). 1 Press ON SCREEN twice to access the on-screen bar. 2 Press selection keys to select Aj9B, then press ENTER. The pop-up window appears under the selected item. TITLE 99 DVD- VIDEO CHAPTER 99 EACH 0:00 CINEMA AUTO 3 Press the number keys to enter the time, then press ENTER. Playback starts from the specified time. Example: To play back from a point 12 (minutes): 50 (seconds) elapsed. TIME TIME TIME Press 1 Press 5 TIME TIME Press 2 Press 0 If you have specified a wrong selection, Press RETURN on the remote control and repeat the above procedures from step 2. To clear the on-screen bar Press ON SCREEN. NOTES: ● When A7B is displayed on the TV screen in step 3, you have selected a point that exceeds the recording time of the disc. ● Some DVD VIDEO discs do not contain time information, and it is not possible to use the Time Search function. In such cases, A7B is displayed on the TV screen as well. ● This function is not possible for a Video CD/SVCD with PBC function. It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your 2- channel stereo system. 1 Press ON SCREEN twice to access the on-screen bar. 2 Press selection keys to select A B, then press ENTER. ● A3D-ONB appears above the selected item and Simulated Surround Effect is activated. ● Each time you press ENTER, A3D-ONB appears and disappears alternately. TITLE 99 DVD- VIDEO CHAPTER 99 EACH 0:00 3D-ON CINEMA AUTO To clear the on-screen bar Press ON SCREEN. To cancel the simulated surround effect Press ENTER to clear A3D-ONB from the screen. NOTES: ● Simulated Surround Effect works correctly only when playing back a title recorded in multichannels. ● Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the [DIGITAL AUDIO OUT] connectors. ● When Simulated Surround Effect is activated, the settings of AANALOG AUDIO OUTB and AD. RANGE CONTROLB are disabled. (A pg. 70) ● Simulated Surround Effect cannot be activated under the following conditions: ● When the HDD deck is in the recording mode. ● When the HDD or DVD deck is in the timer standby mode. ● When a disc containing both the Dolby Digital 5.1CH and 2CH sound formats is playing back a scene that is not in the 5.1CH sound format. Adjusting The Picture Quality You can obtain optimal picture quality by selecting an appropriate picture mode. 1 Press ON SCREEN twice to access the on-screen bar. 2 Press selection keys to select A B, then press ENTER. The pop-up window appears under the selected item. TITLE 99 DVD- VIDEO CHAPTER 99 EACH 0:00 CINEMA AUTO 3 Press selection keys to select the desired option, then press ENTER. NORMAL: Normally select this option. CINEMA: Suitable for a movie disc, etc. SHARP: Clearer, sharper-edged picture when viewing images with lots of flat, same-colored surfaces such as cartoons. SOFT: Select this option when too much noise appears. To clear the on-screen bar Press ON SCREEN.