JVC DR-DX5S Instruction Manual - Page 38
Recording Features, Elapsed Recording Time And Disc Remaining Time
View all JVC DR-DX5S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 EN BASIC OPERATIONS ON HDD DECK Recording Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. ● Press DV/HDD/DVD SELECT on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the unit. HDD lamp DV/HDD/DVD SELECT HDD R CABLE/DBS TV DVD REMAIN DISPLAY Watch Another Program While Recording On The Unit While recording is going on, you can watch another program on the TV. It does not interfere with recording. 1 Turn on the TV. 2 Select the desired channel to watch on the TV using your TV's remote control. Elapsed Recording Time And Disc Remaining Time Indication During recording, press DISPLAY repeatedly until the desired indication appears on the front display panel. ● Each time you press DISPLAY, the time indication changes as follows: Elapsed recording time N Disc remaining time N Clock N (Back to the beginning) ● You can also check the disc remaining time by pressing REMAIN while the unit is stopped or recording is in progress. The list of disc remaining times for all recording modes appears on the TV screen. Second Audio Recording This unit's built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set A2ND AUDIO RECORDB to AONB. (A pg. 71) NOTES: When the channel is changed on the unit; ● The AMONOB indicator appears on the screen for about 5 seconds if the program is a monaural broadcast. ● The ASTEREOB indicator appears on the screen for about 5 seconds if the program is a stereo broadcast. ● Both ASTEREOB and ASAPB indicators appear when a stereo program is accompanied by SAP sound. ● Both AMONOB and ASAPB indicators appear when the main audio on the monaural broadcast is accompanied by SAP sound. Instant Timer Recording (ITR) This easy method lets you record for 30 minutes to 6 hours (selectable in 30-minute intervals), and shuts the unit off after recording is finished. 1 Press R on the unit to start recording. 2 Press R again to engage the ITR mode. ● On the front display panel, A0:30B appears. 3 If you want to record for more than 30 minutes, press R to extend the time. Each press extends recording time by 30 minutes. NOTES: ● You can only perform ITR using the R button on the unit. ● ITR is not possible during timer recording. ● When the recording capacity becomes full during timer recording or Instant Timer Recording, the unit is automatically shut off.