JVC DR-DX5S Instruction Manual - Page 79
Timer Recording HDD & DVD Deck, Other Problems
![]() |
View all JVC DR-DX5S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Timer Recording (HDD & DVD Deck) Timer programming cannot be made. ● Date and time is not correct. ] Set date and time correctly. (A pg. 21) ● Timer recording is in progress. ] Timer programming can't be performed while a timer recording is in progress. Wait until it finishes. Timer programming recording does not start. ● Date and time is not correct. ] Set date and time correctly. (A pg. 21) VCR Plus+ Timer Programming cannot be made. ● Date and time set on the unit is not correct. ] Set date and time correctly. (A pg. 21) ● The channel position does not correspond to that in the receiving area. ] Set the correct channel position for the receiving broadcast. (A pg. 22) The VCR Plus+ system does not timer record properly. ● The unit's channel positions have been set incorrectly. ] Refer to AChanging VCR Plus+ SettingB (A pg. 73) and reperform the procedure. On the front display panel, A- -:- -B appears. ● Power failure occurred. ] Set date and time correctly. (A pg. 21) APROGRAM FULLB appears on the TV screen during timer programming. ● 32 programs have already been timer programmed. ] Clear unnecessary programs on the unit, then try timer programming again. (A pg. 49) The disc space does not increase when recorded titles are cleared. ● The PC's data recorded on a DVD-RAM drive cannot be cleared on this unit. ] Format the disc. (When the disc is soiled, wipe the disc with a soft dry cloth before formatting.) (A pg. 11, 74) Other Problems TROUBLESHOOTING EN 79 The image of the TV broadcast appears distorted on the TV screen. For RF/AV/S-video connection ] Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator (q) lights off on the front display panel. For component video connection ] Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator (q) lights up on the front display panel. Whistling or howling is heard from the TV during camcorder recording. ● The camcorder's microphone is too close to the TV. ] Position the camcorder so its microphone is away from the TV. ● The TV's volume is too high. ] Turn the TV's volume down. When scanning channels, some of them are skipped over. ● Those channels have been designated to be skipped. ] If you need the skipped channels, restore them. (A pg. 22) The channel cannot be changed. ● Recording or RetroActive Recording* is in progress. ] Press W to pause recording, change the channel, then press I to resume recording. * HDD deck only Channel settings that were made manually seem to have changed or disappeared. ● After the manual settings were made, Auto Channel Set was performed. ] Perform AManual Clock SetB (A pg. 21). Even though Auto or Semiauto Clock Set has been performed, the clock is incorrect. ● The clock setting data received from the host channel is incorrect. ] Select a different host channel during ASemiauto Clock SetB (A pg. 21), or perform AManual Clock SetB (A pg. 21). Malfunction occurs and the unit cannot be power off. ] Reset the unit by disconnecting the AC power plug from the AC outlet and connect again.
![](/manual_guide/products/jvc-drdx5s-instruction-manual-be290cb/79.png)