JVC DR-DX5S Instruction Manual - Page 62
Edit From A Camcorder
![]() |
View all JVC DR-DX5S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
62 EN EDITING Edit From A Camcorder You can use a camcorder as the source player and your unit as the recording deck. If your camcorder has a DV IN/OUT connector, you can use the camcorder as the recording deck and your unit (DV deck only) as the source player. A If the camcorder has no S-VIDEO output connector: To [VIDEO/AUDIO ((MONO) L/R)] input Audio/video cable (not supplied) Recorder AUDIO/VIDEO OUT Player B If the camcorder has an S-VIDEO output connector: To [S-VIDEO] input To [AUDIO] input Recorder S-video cable (not supplied) S-VIDEO OUTPUT Audio cable (not supplied) AUDIO OUTPUT Player C If the camcorder has a DV IN/OUT connector: ● Slide the TV/CABLE/DBS/DVD switch to DVD. 1 Make connections. A If the camcorder has no S-VIDEO output connector: ^ connect the camcorder's AUDIO/VIDEO OUT connectors to the unit's [VIDEO/AUDIO ((MONO) L/R)] input connectors on the front panel. ● When using a monaural camcorder, connect its AUDIO OUT connector to the [AUDIO-L] input connector on your unit. B If the camcorder has an S-VIDEO output connector: ^ connect the camcorder's AUDIO OUT and S-VIDEO OUT connectors to the unit's [AUDIO] and [S-VIDEO] input connectors on the front panel. C If the camcorder has a DV IN/OUT connector: ^ connect the camcorder's DV IN/OUT connector to the unit's [DV IN/OUT] connector. ● When using your unit as the source player, refer to the camcorder's instruction manual for the recording procedure. 2 Press DV/HDD/DVD SELECT on the unit repeatedly to select the recording deck. 3 Press CH +/- to select AF-1B or ADVB. ● Set AFRONT AUX F-1B to AVIDEOB for the [VIDEO] input connector, or AS-VIDEOB for the [S-VIDEO] input connector, depending on the connector being used. (A pg. 72) 4 Press REC MODE repeatedly to set the recording mode. For DV deck, press REC MODE on the remote control to set the recording mode. 5 Start playback on the camcorder slightly before the actual point from where you wish to start dubbing. 6 Press R on the unit to start recording. Or while holding R, press I on the remote control. The dubbing starts. 7 Press o on the unit, then stop playback on the camcorder. NOTES: ● All necessary cables can be obtained from your dealer. ● Refer to the camcorder's instruction manual for operating procedure. ● The quality of dubbed picture becomes poorer than that of the original. ● When you are editing through the [DV IN/OUT] connector, the unit will stop if the player begins playing a blank portion of tape or the signal is interrupted. ● When connecting the unit to a device equipped with a DV input connector, be sure to use the optional DV cable (VC-VDV 204U). ● To edit through the [DV IN/OUT] connector using the HDD or DVD deck, refer to ADV Dubbing (HDD & DVD Deck Only)B (A pg. 60). Recorder/Player To [DV IN] DV cable (VC-VDV 204U) (not supplied) DV connector Player/Recorder
![](/manual_guide/products/jvc-drdx5s-instruction-manual-be290cb/62.png)