JVC DR-DX5S Instruction Manual - Page 70

70 EN SUBSIDIARY SETTINGS Mode Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. HDD CABLE/DBS TV DVD DVD ENTER Selection Keys FGDE SET UP AUDIO Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 70 through 72), then follow the procedure below. DVD VIDEO SET UP LANGUAGE SET (A pg. 20) AUDIO OUTPUT (See right column) PARENTAL LOCK (A pg. 33) DISC PLAY SET UP (A pg. 71) HDD/DVD/DV SET UP HDD SET UP (A pg. 71) DVD SET UP (A pg. 71) DISC SET UP (A pg. 74, 75) DV SET UP (A pg. 71) FUNCTION SET UP REC/PLAY SET UP (A pg. 71) DISPLAY SET (A pg. 72) VIDEO IN/OUT (A pg. 23, 72) INITIAL SET UP TUNER SET (A pg. 22) CLOCK SET (A pg. 21) ● The procedure below shows how to set the desired option of the A2ND AUDIO RECORDB mode as an example. 1 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen. 3 Press selection keys to select AFUNCTION SET UPB, then press G. 4 Press selection keys to select AREC/PLAY SET UPB, then press G. 5 Press selection keys to select A2ND AUDIO RECORDB, then press ENTER. DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP REC/PLAY SET UP DISPLAY SET VIDEO IN/OUT INITIAL SET UP XP MODE REC AUDIO 2ND AUDIO RECORD JUMP TIME DOLBY DIGITAL OFF 15 MIN 6 Press selection keys to select the desired option, then press SET UP EXIT ENTER SELECT SELECT WITH @ THEN PRESS [ENTER] PRESS [SET UP] TO EXIT ENTER. 7 Press SET UP to complete the setting. * The boldface settings below indicate the settings at your purchase. AUDIO OUTPUT 8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/ PCM / PCM ONLY Set to the appropriate mode according to the type of the device connected to [DIGITAL AUDIO OUT] connector. DOLBY DIGITAL/PCM: Select this when you connect the digital input connector of a Dolby Digital Decoder or an amplifier with a built-in Dolby Digital Decoder. STREAM/PCM: Select this when you connect the digital input connector of an amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel decoder. PCM ONLY: Select this when you connect the linear PCM digital input of other audio equipment (amplifier, MD or DAT deck, etc.). NOTES: ● This setting also functions when HDD is active. ● If you watch or play back a title which contains multiple audio languages, select APCM ONLYB in advance and choose main or sub audio with AUDIO. 8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back. STEREO: Select this when listening to conventional two-channel stereo audio with the unit's [AUDIO OUTPUT] connectors connected to a stereo amplifier/receiver or TV set, or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc, etc. DOLBY SURROUND: Select this when listening to multichannel surround audio with the unit's [AUDIO OUTPUT] connectors connected to an amplifier/receiver with a built-in surround decoder or a surround decoder. 8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a program encoded in Dolby Digital format. This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. NORMAL: Normally select this setting to activate this function. WIDE RANGE: Select this to deactivate this function when you enjoy wide dynamic range program. TV MODE: Select this when you hear the sound through the TV's speaker(s). NOTES: ● This function has no effect on programs other than those recorded in Dolby Digital format. ● This function does not work when Simulated Surround Effect is activated. (A pg. 31) ● The effect of ANORMALB and AWIDE RANGEB may not be different depending on discs. 8 OUTPUT LEVEL ^ STANDARD / LOW You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment. STANDARD: Normally select this setting. LOW: The output level of analog audio is lowered.