JVC DR-DX5S Instruction Manual - Page 73

Changing VCR Plus+ Setting The VCR Plus+ programming system assigns a VCR Plus+ guide channel to the TV channels and the cable channels. These guide channel numbers are also called the VCR Plus+ channel codes. Most TV listings have a section, usually a chart, indicating the guide channel numbers assigned to each station. To ensure that VCR Plus+ timer recording operates correctly, it is necessary to set the "VCR Plus+ Guide Channel" for each station. If you have moved to a different area or if a broadcasting station's channel number has been changed, perform the following steps to set the correct guide channel number. NOTES: ● In many instances, the VCR Plus+ guide channel numbers for cable and broadcast TV stations DO NOT match the channel number on which it is received by your unit or cable box. Check your TV listing, or contact your cable supplier for details. ● Many TV stations can be viewed on cable. Check your TV listing, or contact your cable supplier for details. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. HDD CABLE/DBS TV DVD DVD ENTER Selection Keys FGDE SUBSIDIARY SETTINGS EN 73 Guide Channel Number Set 1 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen. 3 Press selection keys to select AINITIAL SET UPB, then press G. 4 Press selection keys to select ATUNER SETB, then press G. DVD VIDEO SET UP HDD/DVD/DV SET FUNCTION SET UP INITIAL SET UP TUNER SET CLOCK SET 5 Press selection keys to select AUTO CH SET MANUAL CH SET AGUIDE CH SETB, then press ENTER. GUIDE CH SET 11 12 13 6 Press selection keys to select AGUIDE CH SETB, then press ENTER. 7 Press selection keys to select SET UP EXIT ENTER SELECT SELECT WITH @ THEN PRESS [ENTER] PRESS [SET UP] TO EXIT 11 12 13 INITIAL SET UP > GUIDE CH SET GUIDE CH 1 CABLE CH -- the Guide Channel number for the desired station as shown in RETURN the TV listings. Then press ENTER. SET UP EXIT ENTER SELECT SELECT WITH @ THEN PRESS [ENTER] PRESS [SET UP] TO EXIT ● If you receive your channels with a cable box and if you have properly set your Controller, ACABLE CHB appears in place of ADVD CHB. 8 Press selection keys to select ADVD CHB, then press ENTER. Press selection keys to select the number of the unit's channel position on which the Guide Channel Number's broadcast is received by the unit or the DBS receiver. Then press ENTER. ● Repeat steps 6 - 8 as necessary. 9 Press SET UP to complete the setting. Guide Channel Number "Guide Channel (GUIDE CH) Number" refers to the assigned TV station numbers, according to broadcast area, for the VCR Plus+ timer recording. The Guide Channel Numbers can be found in most TV listings. SET UP