JVC DR-DX5S Instruction Manual - Page 71

DISC PLAY SET UP 8 RESUME ^ OFF / ON / DISC RESUME When this function is set to AONB or ADISC RESUMEB, you can use the resume function. (A pg. 26) OFF: You cannot use the resume function. ON: You can start playback from the resume point of the placed disc. DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected. NOTE: ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and already finalized DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under AONB setting will be applied even if ARESUMEB is set to ADISC RESUMEB. HDD SET UP 8 LIVE MEMORY ^ OFF / 30 MIN / 1 HR / 3 HR When this function is set to A30 MINB, A1 HRB or A3 HRB, you can apply the selected time length to ATemporary recording for Live Memory (HDD deck only)B (A pg. 45). DVD SET UP 8 SAVE AS LIBRARY ^ OFF / ON When this function is set to AONB, the recording information is automatically stored in the library. For details, refer to ANavigate Library InformationB (A pg. 55). 8 CONTINUOUS PLAY ^ OFF / ON When this function is set to AONB, multiple titles on a disc are played back continuously one after another. 8 VIDEO MODE RECORDING ASPECT ^ PRIORITIZE 4:3 / PRIORITIZE 16:9 This is the setting for the aspect ratio used when you dub titles to DVD discs in video mode. If the titles you want to dub are recorded in both 16:9 and 4:3, you must select one aspect ratio. PRIORITIZE 4:3: If you select APRIORITIZE 4:3B, even a title recorded in 16:9 is dubbed in 4:3. PRIORITIZE 16:9: If you select APRIORITIZE 16:9B, even a title recorded in 4:3 is dubbed in 16:9. 8 MP3 & WMA / JPEG ^ MP3 & WMA / JPEG You can select files to play back, when both MP3&WMA files and JPEG files are recorded on a disc. MP3 & WMA: Select this to play back MP3/WMA files. JPEG: Select this to play back JPEG files. SUBSIDIARY SETTINGS EN 71 ATTENTION: When SET UP is pressed while in the DV deck mode, the unit will switch to the previous deck mode (HDD or DVD). To proceed to DV deck after changing the settings in the ADV SET UPB menu, press DV/HDD/DVD SELECT on the unit repeatedly or DV on the remote control to select the DV deck. DV SET UP 8 DV AUDIO REC ^12BIT / 16BIT This is the setting for sound mode before recording on a Mini DV tape. 12BIT: Enables Audio Dubbing later. 16BIT: Audio Dubbing is not possible but the recorded sound quality is higher than A12BITB. 8 AUDIO MODE ^ SOUND1 / SOUND2 / MIX You can select the desired sound mode when playing back an audio dubbed Mini DV tape. SOUND1: Original recorded sound. SOUND2: Audio dubbed sound. MIX: Original recorded sound and audio-dubbed sound. NOTES: ● When AAUDIO MODEB is set to AMIXB, both the main and sub audio will be audible for bilingual tapes. ● To select only the main audio or only the sub audio of bilingual tapes, set AAUDIO MODEB to ASOUND1B. REC/PLAY SET UP 8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM You can select the audio format when you record a title in XP mode. When this function is set to ALINEAR PCMB, you can obtain a high-quality audio sound. DOLBY DIGITAL: To record in Dolby Digital format. LINEAR PCM: To record in Linear PCM format. 8 2ND AUDIO RECORD ^ OFF / ON When this function is set to AONB; If a SAP program is received, the SAP audio is recorded on L/R tracks. The main audio is not recorded. If a non-SAP program is received, the main audio is recorded on L/ R tracks. When this function is set to AOFFB, the SAP audio cannot be recorded. NOTE: When the channel is changed on the unit; ● The AMONOB indicator appears on the screen for about 5 seconds if the program is a monaural broadcast. ● The ASTEREOB indicator appears on the screen for about 5 seconds if the program is a stereo broadcast. ● Both ASTEREOB and ASAPB indicators appear when a stereo program is accompanied by SAP sound. ● Both AMONOB and ASAPB indicators appear when the main audio on the monaural broadcast is accompanied by SAP sound.