JVC KW-V340BT Instruction Manual America - Page 49

Settings 2 Select the connection method (1), then confirm the selection ([OK] or [Next]) (2). If [iPod/iPhone] is selected in step 1: Smartphone Setup USB 1 Wire Bluetooth OK [USB 1 Wire] [Bluetooth] Select this when the device is connected via the USB input terminal (on the monitor panel or cable from the rear panel). Select this when the device is connected via Bluetooth. (Go to step 3.) If [Android/Other] is selected in step 1: Smartphone Setup Bluetooth Next 3 When selecting [Bluetooth] as the connection method: Select the device (1), then press [OK] (2) to connect. • If the device is already connected, skip step 1. Paired Device List Device Name 1 Device Name 2 Device Name 3 Device Name 4 Device Name 5 OK Connection Remove Configure settings for using a Bluetooth device, such as connection and other general operations. For details, see "Bluetooth settings" on page 39. (Only for KW-V340BT) Get information, and change the settings for using the ADS adapter. • ON (Initial): Activates the key-touch tone. • OFF: Deactivates the key-touch tone. Memorize, recall, or clear the settings you have made. • The memorized settings are kept even when the unit is reset. Touch [Yes] to display the setting screen, then select an operation: • Recall: Recalls the memorized settings. • Memory: Memorizes the current settings. • Clear: Clears the currently memorized settings. • Cancel: Cancels. A confirmation message appears. Touch [Yes]. (Only for KW-V240BT Region 4) This unit has its own Registration Code. Once you have played back a file with the Registration Code recorded, this unit's Registration Code is overwritten for copyright protection. • Touch [Enter] to display the information. • To return to the previous screen, touch [OK]. The screen appears. Go to step 3. ENGLISH 47