JVC SR-VS20U 76 pg User's Manual on the SR-VS20U (1776KB, PDF) - Page 23
Load A Cassette, Select Dv Deck, Select Recording, Channel, Set Tape Speed, Start Recording, Pause/
View all JVC SR-VS20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
EJECT PLAY REC DV STOP PAUSE CH DV record indicator NUMBER T 1 4 W 2 5 3 2 6 7 8 9 0 4 DV ENTER CH SP/LP 1 PLAY REC DV S-VHS PAUSE 3 STOP EN 23 DV Deck LOAD A CASSETTE 1 Insert a Mini DV cassette with the erase protection switch set to "REC". SELECT DV DECK 2 Press DV. SELECT RECORDING CHANNEL 3 Press CH +/-. Or press the appropriate NUMBER keys, then press ENTER. (The channel changes after a few seconds whether you press ENTER or not.) SET TAPE SPEED 4 Press SP/LP to set the recording speed. START RECORDING 5 Press and hold REC and press PLAY on the remote control, or press REC on the VCR's front panel. The DV record indicator ( ) lights. PAUSE/RESUME RECORDING 6 Press PAUSE. Press PLAY to resume recording. ● During record pause, you can change the recording channel by using the CH +/- buttons or NUMBER keys. STOP RECORDING 7 Press STOP. The DV record indicator ( ) goes off. Then press EJECT on the DV deck to remove the cassette. NOTES: ● It is not possible to record a TV program on both the VHS deck and the DV deck simultaneously. In addition, it is not possible to record simultaneously from the same external input. ● When you record a tape on the DV deck with the recording speed set to "LP", we recommend that you play that tape back on this deck. Digital video recorder from other manufacturers may not be able to play the tape properly.