JVC SR-VS20U 76 pg User's Manual on the SR-VS20U (1776KB, PDF) - Page 31

Digital R3 (VHS deck only) Digital R3 picture system applies edge correction to the luminance signal to enhance detail. ACCESS MAIN MENU SCREEN 1 Press MENU. ACCESS VHS MODE SET SCREEN 2 Move the highlight bar (arrow) to "VHS MODE SET" by pressing %fi, then press OK or #. 3 SELECT DIGITAL R3 SET MODE Move the highlight bar (arrow) to "DIGITAL R3" by pressing %fi, then press OK or # to set to "ON". VHS MODE SET S-VHS MODE OFF VIDEO CALIBRATION ON PICTURE CONTROL AUTO FRONT AUX INPUT VIDEO AUTO SP=EP TIMER OFF BLUE BACK ON = NEXT PAGE SELECT WITH (5,∞) AND (OK) PRESS (MENU) TO END PREVIOUS PAGE DIGITAL TBC/NR =VIDEO STABILIZER =DIGITAL R3 AUDIO MONITOR OFF ON ON HI-FI SELECT WITH (5,∞) AND (OK) PRESS (MENU) TO END RETURN TO NORMAL SCREEN 4 Press MENU. NOTES: ● Normally it is recommended to keep "DIGITAL R3" set to "ON". ● Depending on the type of tape being used, picture quality may be better with "DIGITAL R3" set to "OFF". ● If you use this VCR as the player for editing, be sure to set "DIGITAL R3" to "OFF" before starting. EN 31 Digital TBC/NR (VHS deck only) Your VCR is equipped with the Digital TBC (Time Base Corrector) that removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental cassettes. The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables clear picture reproduction is also linked to this function. * The default setting is "ON". We recommend that you use the Digital TBC feature when... ... playing back a tape recorded on a camcorder. ... playing back a tape repeatedly used. ... using this VCR as the player for editing. ACCESS MAIN MENU SCREEN 1 Press MENU. ACCESS VHS MODE SET SCREEN 2 Move the highlight bar (arrow) to "VHS MODE SET" by pressing %fi, then press OK or #. SELECT DIGITAL TBC/NR SET MODE 3 Move the highlight bar (arrow) to "DIGITAL TBC/NR" by pressing %fi, then press OK or # to set to "ON". RETURN TO NORMAL SCREEN 4 Press MENU. NOTES: ● If you play back a tape recorded under poor TV reception condition, there may be cases where the picture becomes more stable with Digital TBC/NR set to off. ● When Digital TBC/NR is set to on, if you play back a tape where certain types of signals are recorded (using a PC or some character generators), the playback picture may be distorted. If this is the case, turn off Digital TBC/NR. ● Digital TBC/NR and Video Stabilizer (੬ pg. 30) cannot be used at the same time; if you turn on Digital TBC/NR when "VIDEO STABILIZER" is set to "ON", Video Stabilizer will be automatically turned "OFF". Make sure Digital TBC/NR is off when you want to use Video Stabilizer.