JVC SR-VS20U 76 pg User's Manual on the SR-VS20U (1776KB, PDF) - Page 56

56 EN Edit To Or From Another VCR Player VIDEO OUT AUDIO OUT Your VCR ANTENNA IN VHF/UHF TV OUT S VIDEO IN OUT1 OUT2 CABLE BOX VIDEO IN R L OUT1 R L OUT2 AUDIO S VIDEO OUT S-Video cable (supplied) S VIDEO IN Audio/Video cable (supplied) AUDIO IN Recorder VIDEO IN Another VCR S-VHS DV EDITING (cont.) You can use your VCR as the player or the recorder. MAKE CONNECTIONS 1 Connect an AV cable between the player's VIDEO OUT and AUDIO OUT connectors and the recorder's VIDEO IN and AUDIO IN connectors. ● If using another VCR with an S-VIDEO input or output connector, it is recommended to use the S-VIDEO connection to minimize picture degradation while editing. ● When using your VCR as the recorder and a monaural VCR as the player, connect the player's AUDIO OUT connector to the AUDIO IN L connector on the recorder. LOAD CASSETTES 2 Insert the playback cassette into the player and the cassette to be recorded on into the recorder. SELECT DECK 3 Press S-VHS or DV. ● When using your VCR as the source player, set "OUTPUT1" to "VHS" or "DV", depending on the deck being selected (੬ pg. 57). Advantages Of S-VHS Editing S-VHS allows you make high resolution video recordings when dubbing from one VCR to another. You can edit from VHS to S-VHS, from S-VHS to VHS, or from S-VHS to S-VHS. ● From VHS to S-VHS: Record VHS playback signals in the S- VHS mode. Although the picture quality is inherently limited by the orignal VHS source material, the edited tape has better picture quality than those made by VHS-to-VHS editing. ● From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing. ● From S-VHS to S-VHS: A high resolution copy is made of a high resolution original S-VHS tape with minimal picture degradation. This is the preferred method of video dubbing. 2 4 5 6 7 8 9 0 4 DV S-VHS 1 DV S-VHS