JVC SR-VS20U 76 pg User's Manual on the SR-VS20U (1776KB, PDF) - Page 44

44 EN Express Timer Programming Turn on the TV and select the AV mode. DV S-VHS START+/- PROG. DATE+/- T 1 4 W 2 5 3 2 6 7 8 9 0 4 1 DV S-VHS DV CH+/- S-VHS STOP+/- 3 TIMER RECORDING (cont.) You can directly program the VCR's timer to record up to 6 shows each on the VHS and DV decks, as far as a year in advance. Remember, the clock must be set before you can program the timer (੬ pg. 8 or 10). LOAD A CASSETTE 1 Insert a VHS (or S-VHS) cassette with the record safety tab intact, or a Mini DV cassette with the erase protection switch set to "REC". ● The VCR comes on, and the counter is reset, automatically. ● Select the recording deck by pressing S-VHS or DV. ACCESS VCR PLUS+ SCREEN 2 Press PROG.. 3 ACCESS PROGRAM SCREEN Press START +/-. (If you're just starting out, "PROGRAM 1" appears.) VHS PROGRAM 1 START STOP - -:- -AM = - -:- -AM DATE CH - -/- -/- - - - - SP PRESS (+/-, SP/EP, 8=DAILY, 9=WEEKLY), THEN (0K) PRESS (PROG.) TO END 4 SET PROGRAM START TIME Press START +/- to enter the time you want recording to start. ● Press and hold START +/- to move in 30minute increments, or press and release repeatedly to move 1 minute at a time. VHS PROGRAM 1 START STOP 8:00 AM = - -:- -AM DATE CH - -/- -/- - - - - SP PRESS (+/-, SP/EP, 8=DAILY, 9=WEEKLY), THEN (0K) PRESS (PROG.) TO END SET PROGRAM STOP TIME 5 Press STOP +/- to enter the time you want recording to stop. ● Press and hold STOP +/- to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time. SET PROGRAM DATE 6 Press DATE +/-. (The current date is displayed on screen. The date you enter appears in its place.) SET CHANNEL NUMBER 7 Press CH +/-. ● If you are using a DBS receiver, see "ATTENTION FOR DBS RECEIVER USERS" on next page. ● Holding down CH +/- rapidly scans through the channels.