JVC SR-VS20U 76 pg User's Manual on the SR-VS20U (1776KB, PDF) - Page 76

SR-VS20U SPECIFICATIONS GENERAL Power requirement : AC 120 V`, 60 Hz Power consumption Power on : 35 W Power off : 5.5 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : -20°C to 60°C (-4°F to 140°F) Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 127 mm x 390 mm Weight : 6.9 kg Input/Output : RCA connectors: (IN x 2, OUT x 2) S-Video connectors: (IN x 2, OUT x 2) DV connectors: (IN/OUT x 1) (4-pin, IEEE1394 conformity, digital input/output) VHS DECK VIDEO/AUDIO Signal system : NTSC-type colour signal and EIA monochrome signal, 525 lines/ 60 fields Recording system : DA4 (Double Azimuth) head helical scan system Format : S-VHS/VHS NTSC standard Signal-to-noise ratio : 45 dB Horizontal resolution : 240 lines (VHS) 400 lines (S-VHS) Frequency range : 70 Hz to 10,000 Hz (Normal audio) 20 Hz to 20,000 Hz (Hi-Fi audio) Maximum recording time (SP) : 210 min. with ST-210 video cassette (EP) : 630 min. with ST-210 video cassette DV DECK VIDEO/AUDIO Signal system : NTSC-type colour signal, 525 lines/60 fields Recording system : Digital Component Recording Format : DV format (SD mode) Cassette : Mini DV Cassette Maximum recording time (SP) : 60 min. with M-DV60ME cassette (LP) : 90 min. with M-DV60ME cassette Audio recording system : PCM 48 kHz, 16 bit (2 ch)/ 32 kHz, 12 bit (4 ch) TUNER Tuning system Channel coverage VHF UHF CATV : Frequency-synthesized tuner : Channels 2-13 : Channels 14-69 : 113 Channels TIMER Clock reference Program capacity Memory backup time : Quartz : 1-year programmable timer/ 6 programs each on the VHS and DV deck : Approx. 60 min. ACCESSORIES Provided accessories : RF cable (F-type), BNC/RCA adapter x 2, Infrared remote control unit, "AA" battery x 2, Audio/Video Cable, S-Video cable (4-pin), Controller Specifications shown are for SP mode unless otherwise specified. E. & O.E. Design and specifications subject to change without notice. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. VICTOR COMPANY OF JAPAN, LIMITED COPYRIGHT 2001 VICTOR COMPANY OF JAPAN, LTD. U/U(C) Printed in Japan * * 0301 IYV ID VP