JVC SR-VS20U 76 pg User's Manual on the SR-VS20U (1776KB, PDF) - Page 37

Stereo And SAP (Second Audio Program) Your VCR's built-in MTS decoder enables reception of Multichannel TV Sound broadcasts. When the channel is changed on the VCR ... ● The "STEREO" indication appears on the screen for about 5 seconds if the program is a stereo broadcast. ● The "SAP" indication appears on the screen for about 5 seconds if the program is a SAP broadcast. ● Both indications appear when a stereo program is accompanied by SAP audio. To Record Stereo Programs simply follow the basic recording procedure. To Listen To Stereo Soundtrack During Recording press A. MONITOR to select "HI-FI" (੬ pg. 32). To Record SAP Programs . . . ACCESS MAIN MENU SCREEN 1 Press MENU. ACCESS MODE SET SCREEN 2 Move the highlight bar (arrow) to "MODE SET" by pressing %fi, then press OK or #. 3 SELECT 2ND AUDIO RECORD SET MODE Move the highlight bar (arrow) to "2ND AUDIO RECORD" by pressing %fi, then press OK or # to set to "ON". MODE SET REAR AUX INPUT VIDEO OUTPUT1 AUTO = 2ND AUDIO RECORD ON AUTO TIMER OFF SUPERIMPOSE ON SELECT WITH (5,∞) AND (OK) PRESS (MENU) TO END RETURN TO NORMAL SCREEN 4 Press MENU. NOTES: ● If a SAP program is received and "2ND AUDIO RECORD" is set to "ON", the SAP audio is recorded on both the Normal and Hi-Fi tracks. The main audio program is not recorded. ● If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and Normal audio tracks. EN 37 Retake (VHS deck only) You can cut out unnecessary parts of a TV program while you're recording it. End of program Beginning of program Program Unnecessary Unnecessary Program part part Recorded part Go back to end of program to cut out unnecessary part ENGAGE RECORD-PAUSE MODE 1 Press PAUSE during recording. LOCATE START POINT 2 Turn the JOG dial to the left or right (or hold down REW or FF) and release it when you reach the point where you want to resume recording. * Your recorder returns to the Record-Pause mode. RESUME RECORDING 3 Press PLAY when you wish to resume recording. Accidental erasure prevention ● VHS/S-VHS To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape. Record safety tab ● Mini DV To prevent accidental recording on a recorded cassette, set its erase protection switch to "SAVE". To record on it later, set the switch to "REC". Erase protection switch