JVC TK-C1460U Instruction Manual - Page 33
to B&W IN., B&W OUT
View all JVC TK-C1460U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Item AUX TERMINAL D-ZOOM MAX Functions and set values Initial value For setting the signal input or output of the AUX terminal. (B&W IN) MOTION: A signal is output if there is a change in the area set on the MOTION DETECT screen. B&W OUT: A signal is output when the camera switches to B&W or Colour mode. B&W IN: Set to this position when inputting the B&W/ Colour switching control signal to the AUX terminal. (੬ Page 11, 30.) MEMO • In setting B&W OUT, if you use an infrared illuminator in link motion, hunting can occur. To prevent this, we recommend that you link in motion this unit and the infrared illuminator, etc., by control signals after setting to B&W IN. • If the B&W item is set to AUX, the AUX TERMINAL item changes to [B&W IN] and can not be changed. This function sets the maximum zoom ratio of the x2 electronic zooming. [Set values: x1, x2, x4, x6, x8, x10] MEMO • The electronic zoom function can only be used by the communication command of exclusive controllers (RMP2580, etc.). • Note Picture quality deteriorates under electronic zooming as it is accompanied by digital image processing. • When the electronic zoom magnification ratio is increased, there may be blurring in the upper center left of the screen. This is a characteristic of the main unit and is not a malfunction. E-33