JVC TK-C1460U Instruction Manual - Page 35

COMMUNICATION Screen Settings are made for the control signal-connecting terminals on the back. If the setting is changed, be absolutely sure to switch on the power again. Item Functions and set values Initial value STYLE This sets a communication system according to the system used. P TO P (Point to point) This is set when a remote control unit controls a camera. M.DROP (Multi-drop) This is set when a remote control unit controls a plural number of cameras. P TO P MACHINE ID This is set when the STYLE item is set to M.DROP. This is the number that identifies individual cameras in a group. No proper function can be realized if an ID number is repeated within a system. A combined use with the RM-P2580 necessitates the setting together with the video input number of the RMP2580. If the item STYLE is set to P TO P, "- - -" will appear, and settings cannot be changed. [Set values: 1 to 99] - - - FACTORY SETTINGS Screen Set values are returned to initial values. Item FACTORY SETTINGS Functions and set values Initial value The values set on the menu are returned to initial values. - CANCEL : No return to the initial value. CLEAR : Returns set values except titles to the (WITHOUT TITLE) initial value. CLEAR (ALL) : Returns all set values including titles to the initial value. Select respective set value and press the SET button. Then, "DATA CLEARED" will appear for about 3 seconds. Be sure not to switch off the power while the display is still on. MEMO However, when FACTORY SETTINGS by means of transmitted commands, the contents of the COMMUNICATION menu do not return to the factory settings. E-35