Kenmore 8674 Use and Care Guide - Page 18

Set the inner door assembly

Get Kenmore 8674 - Elite HE3 Steam 7.2 cu. Ft. Electric Dryer PDF manuals and user guides View all Kenmore 8674 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Feve se You can change your door swing from a right-side opening to a left-side opening, if desired. NOTE: For ease of installation, you may want to use 2 or more people to remove and reattach the dryer door. Remove the door 1. Place a towel or soft cloth on top of the dryer or work space to protect the surface. 2. Open the dryer door. Remove the 5 screws that hold the door hinge on the front panel of the dryer. \ Swng 3. Move the large hole screw to the opposite side. Remove the 2 plug screws and plastic plugs, and insert them in the original screw holes on the opposite side. A. Dryer front panel B. Dryer door C. Screws 3, Remove the door. 4. Lay the dryer door on a fiat, protected surface with the inside door assembly facing up. Remove the 5 screws to release the outer door assembly from the inner door assembly, as indicated below. See illustration. It is important that you remove only the 5 indicated screws. A. Hinge screws B. Large hole screw C. Plug screws and plastic plugs 4. Move hinge to the other side and reattach with the 4 screws removed in Step 2. Make sure Iocator pins line up in holes and drive the top 2 screws in place first to help drive Iocator pins into proper location. 5. Set the inner door assembly aside. Reverse the door handle 1. Place the outer door assembly face down on work space. 2. Remove the 6 screws that hold the intermediate door to the outer door assembly. Remove the intermediate door, and set hinge shield aside. Remove the hinge hole cover. 5. Lift the inner door assembly off of the outer door assembly. Set the outer door assembly aside. Reverse the hinge 1. Place the inner door, screw head side up, on the work space. 2. Remove the 4 hinge screws that hold the hinge to the door and remove hinge. A B A. Intermediate door B. Hinge shield C. Hinge hole cover 3, Rotate the window assembly 180° and reattach the intermediate door, hinge shield and hinge hole cover with the 6 screws removed in Step 2. A. Hinge side screw B. Locator pins on hinge C. Top side screw 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Feve
se
Swng
You can change your door swing from
a right-side
opening
to a
3.
Move the large hole screw to the opposite
side. Remove the
left-side
opening,
if desired.
2 plug screws
and plastic
plugs, and insert them
in the
NOTE: For ease of installation,
you may want to use 2 or more
original screw
holes on the opposite
side.
people to remove and reattach
the dryer door.
Remove
the
door
1.
Place a towel or soft cloth on top of the dryer or work
space
to protect the surface.
2.
Open the dryer door. Remove the 5 screws that hold the door
hinge on the front panel of the dryer.
\
3,
4.
A. Dryer front panel
B. Dryer door
C. Screws
Remove the door.
Lay the dryer door on a fiat, protected
surface with the inside
door assembly
facing
up.
Remove the 5 screws
to release the outer door assembly
from the inner door assembly,
as indicated
below.
See
illustration.
It is important
that you remove only the
5 indicated
screws.
A. Hinge screws
B. Large hole screw
C. Plug screws
and
plastic
plugs
4.
Move hinge to the other side and reattach
with the 4 screws
removed
in Step 2. Make sure Iocator pins line up in holes
and drive the top
2 screws
in place first to help drive Iocator
pins into proper
location.
5.
Set the inner door assembly
aside.
Reverse
the
door
handle
1.
Place the outer door assembly
face down on work space.
2.
Remove the 6 screws
that hold the intermediate
door to the
outer door assembly.
Remove the intermediate
door, and set
hinge shield aside. Remove the hinge hole cover.
5.
Lift the inner door assembly
off of the outer door assembly.
Set the outer door assembly
aside.
Reverse
the
hinge
1.
Place the inner door, screw head side up, on the work space.
2.
Remove the 4 hinge screws that hold the hinge to the door
and remove hinge.
A
B
3,
A. Intermediate
door
B. Hinge
shield
C. Hinge
hole cover
Rotate the window
assembly
180° and reattach
the
intermediate
door, hinge shield
and hinge hole cover with the
6 screws removed
in Step 2.
A. Hinge
side
screw
B. Locator
pins
on hinge
C. Top side screw
18