Kenmore 8674 Use and Care Guide - Page 24

When using Air Fluff • Check that coverings are securely stitched. • Shake and fluff pillows by hand periodically during the cycle. • Dry item completely. Foam rubber pillows are slow to dry. Timed Preset Cycle Settings Timed Cycles Load Type Default Temperature TIMED DRY Heavyweight, bulky items, bedspreads, work clothes High EXPRESS DRY TM Small loads High AIR FLUFF Dry without heat Air Dry* (no heat) Default Time (Minutes) 40 23 36 *Use the Air Fluff cycle for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. You can customize your cycles by selecting options. Not all Options are available with all cycles. Current selections will glow green. If an option is unavailable with a selected cycle, the light will not illuminate when pressed and an error sound will be heard. OPTIONS Wrinkle Guard 120 Damp Dry Signal AUTO CYCLES ONLY Button Sounds Drum Light WRINKLE GUARD _ WRINKLE GUARD _ helps smooth out wrinkles that form when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period. • Press WRINKLE GUARD ® to get up to 2 hours of heat-free, periodic tumbling at the end of a cycle. • Stop WRINKLE GUARD ® at any time by pressing WRINKLE GUARD ® or opening the dryer door. • For the Casual cycle, WRINKLE GUARD ®is preset to ON. The other cycles will retain the WRINKLE GUARD _ setting. For example, if you select WRINKLE GUARD _ in the Normal cycle, WRINKLE GUARD ®will be on the next time you select the Normal cycle. NOTE: If you do not select WRINKLE GUARD ®, the dryer stops after cool down. Damp Dry Signal Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing. The Damp Dry Signal is useful when drying bedsheets/linens in a mixed load or large items in the "Bulky/Bedding" cycle. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process. For the "Bulky/Bedding" cycle, the Damp Dry Signal is preset to ON. NOTE: The Damp Dry Signal is available only with the Auto Cycles. Button Sounds You can change the volume of the sound of the beeps. Press BUTTON SOUNDS until the desired volume (Loud, Soft or Off) glows. The Power and Cancel buttons will still beep softly when the Button Sounds volume is set to Off. Drum Light Press Drum Light to turn on the light inside the dryer drum. During a cycle, if Drum Light is selected, the drum light turns on and will remain on until DRUM LIGHT is pressed again, the door is open and closed, or the door is left open for 5 minutes. When the dryer is not running, the drum light will turn on when DRUM LIGHT is pressed or the dryer door is opened, and it will remain on until the dryer door has been open for 5 minutes, the dryer door is closed or DRUM LIGHT is pressed again. Press DRUM LIGHT at any time to turn the drum light ON or OFE Use Modifiers to select time and temperature for the Touch Up Cycle. You may select dryness level for Automatic Cycles. Not all Modifiers are available with all options and cycles. Available modifier settings will glow amber. Current selections will glow green. If a modifier is unavailable with a selected cycle, the light will not illuminate. Time Press MORE TIME or LESS TIME until the desired drying time is displayed. The time cannot be changed with Auto Cycles. Temperature Press TEMPERATURE until the desired temperature setting glows. Temperature modifiers cannot be used with the Auto Cycles or with Rack Dry or Timed Dry/Air Dry cycles. Med)um High Medium Low Extra Low Air Dry ADJUS'_ S "T_4ED CYCLES 24